The mark consists of J-JACK Information Description: The aspect of the JJACK and how it functions will be based off a concept of a hardware and a software, product. The JJACK is a new automation device that will be accessed as a car jack that will lift the vehicle up from a Wi-Fi and Bluetooth communication point. The Wi-Fi and Bluetooth aspect will be controlled through an app called the J-Jack app, the J-Jack app will be available on the IOS store and apple store. With the J-Jack and the J-Jack app a new motion of hydraulics with Bluetooth has been created and established. J-JACK Hardware Side: The J-JACK is consisted of - Motor, Hydraulic Pump self-designed 2D image, battery, esp32 / Arduino, buck converter, and electrical wiring to connect all the parts together. Oil reservoir Is the heart of the J-JACK, as the user when using the J-Jack as the user presses the on button it will rotate the motor to drive the hydraulic pump to have the application of the pump move the oil into the hydraulic shaft, rod to make the cylinder rise. When the oil reaches the cylinder, it will rise to the axel or frame of the vehicle of wherever the application is being applied. As the mechanical parts in structure rotate and move, it allows the user to create a new motion of hydraulics with Bluetooth and Wi-Fi. J-JACK Software and App side: The J-Jack app will control the electrical parts in the system of the J-Jack such as the ESP32, Arduino, and the relay. These parts keep the equilibrium of the Jack together in terms of voltage and usage of electrical units. With the range of the app and communication ranges from 0ft - 3ft in distance, for the user to use the JACK in communication. The camera can visualize the axis of the vehicle from the ESP32 / Arduino and can connect the aspects all together to function. You will be able to control the motor from an off / on standpoint.