CD WALLIT - Trademark Details
Status: 602 - Abandoned-Failure To Respond Or Late Response
Image for trademark with serial number 78486518
Serial Number
78486518
Word Mark
CD WALLIT
Status
602 - Abandoned-Failure To Respond Or Late Response
Status Date
2005-11-22
Filing Date
2004-09-20
Mark Drawing
4000 - Standard character mark Typeset
Law Office Assigned Location Code
M10
Employee Name
MILTON, PRISCILLA W
Statements
Goods and Services
The CD Wall-It is an innovative way to store and display your Compact Disc cases; The CD Wall-It system allows you to easily place any standard sized Compact Disc case into the patented "holder"; The "holder" is slightly larger than the Compact Disc case (Dimensions?) and holds the disk firmly in place with a claw like mechanism; Simply angle the Compact Disc case into the "holder" then lightly press down; The claw mechanism allows the consumer to open the doors of their Compact Disc cases while inside of the CD Wall-It "holder and still have full access to their Compact Disc; The "holder" has five small holes pre-drilled into it; There is one hole on each corner of the "holder" and one hole in the center; These holes allow you to easily attach the "holder" to the wall with anything from small picture frame nails to thumbtacks/ push-pins; The "holder" also comes with four pre-drilled attachment slots; These slots allow you to connect multiple "holders" to each other allowing the consumer to arrange their "holders" in a variety of different shapes; These attachment slots are found on the top, bottom, right side, and left side of each "holder" (2 x 1;1/2 x 0;1); Each slot is symmetrical with its corresponding slot, meaning the top is perfectly lined up with the bottom, right side perfectly lined up with the left side; The CD Wall-It's attachment system is based on two types of "shape connectors"; The "shape connectors" two-shapes are 1;) Flat, and 2;) Rounded 45-degree angle (1;1/8 x 1;1/8 x 1;1/2 x 01); All "shape connectors" have rounded ends and rounded sides; The rounded ends allow the "shape connectors" to slide easily into the attachment slots on the "holder", and the rounded sides avoid sharp plastic hard edges; Each "shape connector" also has four protuberances, two on the front side, and two on the backside; These protuberances are designed to stop the "shape connectors" from sliding too far into its respective attachment slot; These protuberances allow each "holder" to line up perfectly with every other "holder" when connected by preventing the "shape connectors" from sliding out of position; With these two different shapes, the consumer can create a wide variety of shapes and designs; The Flat "shape connectors" allow the "holders" to connect horizontally or vertically in any direction; An example of this would be to arrange "holders" all over a flat wall; The Rounded 45-degree angle "shape connector" allows for much more versatility; By using a combination of both, Rounded 45-degree angle and Flat "shape connectors", consumers can create 3 dimensional boxes that protrude from their walls, create a stair like effect, or wrap around corners
Pseudo Mark
CD WALLET
Classification Information
International Class
9 - Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin-operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus. - Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin-operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
US Class Codes
021, 023, 026, 036, 038
Class Status Code
6 - Active
Class Status Date
2004-09-27
Primary Code
009
First Use Anywhere Date
2004-08-01
First Use In Commerce Date
2004-08-01
Correspondences
Name
CARSTEN KELM
Address
Please log in with your Justia account to see this address.
Trademark Events
Event DateEvent Description
2004-09-27NEW APPLICATION ENTERED IN TRAM
2005-04-20ASSIGNED TO EXAMINER
2005-04-22NON-FINAL ACTION WRITTEN
2005-04-22NON-FINAL ACTION E-MAILED
2005-11-22ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE
2005-11-22ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND