The mark consists of the word "AB ORTHO, LLC" in non-standard characters. All letters are capitalized, but "AB O" and "LLC" are in slightly larger font size than "RTHO". The first half of the letter "A" is removed so that the vertical slant on the left side is gone as well as part of the center cross. The letter "B" has its back line removed and is adjacent to the letter "A"; the letter "B" is also positioned slant wards such that the bottom half of the letter "B" starts in further than the top half of the letter, and the bottom half also extends further out. The letter "O" in "Ortho" is in standard form. The letter "R" is adjacent to "O", but the back vertical line in the letter "R" is removed. "R" is followed by standard characters for "THO". After the comma, "LLC" is in slightly larger font size than "RTHO" and is the same size as "AB O". There is a design before the letters "AB ORTHO, LLC". This design consists of needle-points in a circular pattern. All of the needle-points are approximately of the same size, and they maintain a constant distance at every 10 degrees between each other. Half of the needle-points have rounded tips from 0 degrees at the top clockwise to 170 degrees, and the other half of the needle points have sharp tips from 180 degrees at the bottom clockwise to 350 degrees. Inside the circular pattern is another circle. This circle is interrupted in five areas by circular nodes that are at the end of bars of various lengths, giving the appearance of a human figure. Each of these bars aligns to an off-center circular node inside the circle, representative as the body of the human figure.